If you have an older car it R12 refrigerant in the air conditioning system. You can still buy R12, but it is very expensive. You are ready, your system in R137 convert, is here a brief explanation of the process with a few insider tips help you. You start, need a conversion kit with all necessary materials. It includes: 2 new car adapter fittings, 2-3 cans of R-134 and a hose with adapter. Once you have all the materials, you can begin the process. The first, what you need to do, is the R12 with a machine restored coolant recovery. (It is illegal, open the valve and let it in the air.) Now that the air conditioning system has no pressure, it's time to install the new valve Kit. At this point some freezing people until (no pun intended), because they are afraid of mixing the adapter at the high and low ends of the pressure. Don't worry, they are different sizes. Greater than one goes on the low pressure side of the system and the refrigerant hose will connect only to the low side valve. It's pretty hard to bring the mess.
Now, the car adapters are connected to valves, it's time to start the car and put the air conditioner on high. Turn the blower set fan his highest and and open the window. Grab a can of R137 and hook the hose and T valve that came with your Kit. With the hose connected to the can begin the T-valve, rotate until it penetrates the can. Then open the valve, have deleted some freon out and the air in the line. Turn the can on the head and hook it up to low-side adapter valve. Now slowly open the valve and let you the freon flow into the system. At this point which compressor in and switch off begins to change. Don't panic, this is normal. Add keep freon, until it starts to cool. One senses begin the low pressure line, to cool and collect condensation on it. (Do not reach the high pressure line.) (You can burn it.) You'll probably not all 3 need cans and make sure the system against overfilling. If the air conditioner is still not cooled, after the second, something is wrong. You have a leak in the system or other difficulties.
Are not tempted to keep freon pumps in the lines. If the low side line is dripping with moisture and cold, you're done. If you have set an air conditioning manifold gauge, have low a pressure of 40-50 PSI.
If you only have a car adapter and will inform not your connection, then all you need is a mobile Internet card. The USB cards are the most versatile because you can use them in almost any computer. Some of them, like the Verizon USB760 have even the software and drivers installed on the device, making the need for a CD.
SOURCE : http://goarticles.com/article/Car-adapter-creating-airconditioning/6452817/
Get New Article Alerts In Your Inbox
Subscribe to Awards Knowledge Article Alerts to get daily notifications of our newest articles in your email for free. You can unsubscribe at any time. share your opinion about Car adapter create air conditioning by comment on below post.
Thank you in advance.
Yours sincerely,


0 komentar:
Posting Komentar